MODIFIED CLASS

 

1. ANY UNCUT DOT TIRE ALLOWED

2. Any complete un-chopped factory BODY and FRAME (body swaps allowed) bumpers optional

3. Factory type bed floor or minimum .092 carbon steel, 3/16" aluminum plate. Functional flat beds allowed

4. No fiberglass body parts FROM DOORS BACK ALLOWED OEM STYLE FIBERGLASS FRONT CLIP ALLOWED

5. Only trimming for tire and header clearance allowed

6. Engine swaps allowed

7. No engine set-backs (#1 sparkplug C/L top ball joint OR OEM LOCATION) motor plates are allowed AFTERMARKET CAST IRON BLOCKS ONLY

8. CONVENTIONAL STYLE 23 DEGREE ALUMINUM AND CAST IRON AND FORD A460 ALLOWED (NO RAISED RUNNER OR SPLAYED VALVE ALLOWED AND NO B, C460, THORE OR PROSTOCK STYLE HEADS ALLOWED) •No tunnel ram or sheet metal intakes •firewall modifications allowed (must be steel equal to original) ABSOULTLY NO NITROUS OR ANY OTHER POWER ADDERS ALLOWED

9. Single carburetor or factory EFI using gasoline or diesel only

10. Modified factory style suspensions and steering allowed (No true 3 or 4 links race style suspensions) fiber leafs allowed

11. SAFETY RACING SEAT AND MINIMUM OF 4 POINT HARNESS REQUIRED 

12. IF DOORS ARE REMOVED FROM VEHICLE MUST HAVE WINDOW NET OR ARM RESTRAINTS

13. ALL VEHICLES MUST HAVE 6 POINT ROLL CAGE (MIN .093, 1.5 INCH STEEL TUBING). AROUND DRIVER. •Must have functional brakes front and rear of vehicle (PINION BRAKES ALLOWED

14. ANY UNCUT DOT TIRE ALLOWED

15. Any complete un-chopped factory BODY and FRAME (body swaps allowed) bumpers optional

16. Factory type bed floor or minimum .092 carbon steel, 3/16" aluminum plate. Functional flat beds allowed

17. No fiberglass body parts FROM DOORS BACK ALLOWED OEM STYLE FIBERGLASS FRONT CLIP ALLOWED

18. Only trimming for tire and header clearance allowed

19. Engine swaps allowed

20. No engine set-backs (#1 sparkplug C/L top ball joint OR OEM LOCATION) motor plates are allowed •AFTERMARKET CAST IRON BLOCKS ONLY

21. CONVENTIONAL STYLE 23 DEGREE ALUMINUM AND CAST IRON AND FORD A460  ALLOWED (NO RAISED RUNNER OR SPLAYED VALVE ALLOWED AND NO B, C460, THORE OR PROSTOCK STYLE HEADS ALLOWED) •No tunnel ram or sheet metal intakes •firewall modifications allowed (must be steel equal to original) ABSOULTLY NO NITROUS OR ANY OTHER POWER ADDERS ALLOWED

22. Single carburetor or factory EFI using gasoline or diesel only

23. Modified factory style suspensions and steering allowed (No true 3 or 4 links race style suspensions) fiber leafs allowed

24. SAFETY RACING SEAT AND MINIMUM OF 4 POINT HARNESS REQUIRED 

25. IF DOORS ARE REMOVED FROM VEHICLE MUST HAVE WINDOW NET OR ARM RESTRAINTS

26. ALL VEHICLES MUST HAVE 6 POINT ROLL CAGE (MIN .093, 1.5 INCH STEEL TUBING). AROUND DRIVER. •Must have functional brakes front and rear of vehicle (PINION BRAKES ALLOWED