TRACTOR PULLS

Saturday, July 21

Registration - 10:00

Pulls - 1:00

Puling Order

5000 lb. Modified Stock

9000 lb. Modified Stock

9500 lb. Pro Farm Turbo

6000 lb. Modified Stock

10000 lb. Modified Stock

10500 lb. Pro Farm Turbo

Open Farm Tractors - Entry $30 (all classes)

1st - $125          2nd - $105          3rd - $80

4th - $60          5th - $30

5000 lb

6000 lb

9000 lb

10000 lb

Turbo Tractors –Entry $30   (all classes)

1st -$125        2nd -$105        3rd -$80     

4th -$60        5th -$30

9500 Pro Farm Turbo

10500 Pro Farm Turbo

2012 STOCK CLASSES

NATURALLY ASPIRATED

Rules and Regulations

5000,6000, 9000,10000 Lb Classes

1.    Stock Block or replacement with some cubic inch.

2.    Intake Manifold must be stock or replacement.

3.    Tractor with four cylinders or less, with a FACTORY turbo, is a legal

       entry in the naturally aspirated classes, if no turbo alterations have been

       made, NO BOLT ON TURBOS IN NATURALLY ASPIRATED CLASSES.

4.    Tire sizes for naturally aspirated classes are as follows:

       A.   5000 & 6000 lb max tire size is 15.5 x 38 or 16.9 x 30

       B.   9000, & 10000 lb max ire size is 18.4 x 38

5.    Any Naturally aspired tractor with 115 or more hp from the factory

       must pull in the Turbo Classes.

6.    Any tractor over 3000 rpm must have a certified high speed fan or

       electric fan.

7.    Any tractor over 3000 rpm must have a “Dead-Man” throttle.

Stock Turbo Class

Rules and Regulations

10500 Pro Farm, 9500 Pro Farm

1.    Stock Block or replacement with same cubic inch.

2.    Intake Manifold must be stock or replacement.

3.    Water injection Turbo’s are allowed.

4.    Bolt on Turbo allowed but must exceed stock turbo size.

5.    Turbo inlet must not exceed 3: and must have a maximum 3” outlet.

       Turbo bushings may not be used to meet regulation size.

6.    Turbo not to exceed a TO-4, 3LM, or equivalent.

7.    Tractors must have (1) stock pump and (1) turbo.

8.    Tire Size is 18.4 x 38 max.

9.    Turbo tractors must have a working (air – shutoff) kill switch which

       must be accessible to the sled and the tractor driver.

10. Turbo tractors over 3000 rpm must have (2) 5/16” bolts within 1” of

       each other and 90* to each other in the vertical portion of the exhaust

       pipe.

11. Turbo tractors over 3000 rpm must have a certified high-speed fan or

       electric fan.

12. Any tractor over 23000 rpm must have a “Dead-Man” throttle.

13. Turbo tractors over 3000 rpm must have a fire extinguisher, fenders,

       side shields, and at least one of the following:

A: Steel SFI flywheel and pressure plate.

B: Scatter Blanket.

             C: Steel Scatter Shield 8” wide x 3/8” thick, 360* around the clutch housing.